New Arrivals

Denton Vacuum Desk IV Standard Sputter Coater for SEM Samples. Provides a uniform, conductive, fine grained coating. Self-contained unit with built-in pump. Advanced design magnetron sputterhead for truly cold sputtering.  Etch mode for sample cleaning. 6” OD pyrex chamber.  Sputters precious metals, no target included. Does not require gas. 120V, 50/60 Hz, 10A

Denton Vacuum Explorer 14 Three Target RF and DC Sputtering System. Vacuum deposition system designed for thin film applications. All process variables are controlled by system computer via graphical user interface. System was upgraded by Denton in 2012 at the factory to include RF/DC magnetron sputtering and software update. System has three 4” diameter magnetron cathodes. Three MKS mass flow controllers for process gas input. 12-inch diameter rotating substrate carrier is heated by quartz lamp under platen. CTI cryopump with compressor and roughing pump. System has scratches on paint from shipping.

Edwards EXT 75DX Compound Turbo pump. 3.75" OD ISO Flange Inlet. Pumping Speed 61 L/S

Espec BTX-475 Temperature & Humidity Chamber, -70°C to 180°C. Humidity range 10% to 95% RH. LOADED CHAMBER! The Espec BTX-475 Temperature and Humidity Chamber provides an economical and space-saving solution for a variety of testing requirements. Featuring an extended temperature range, the BTX-475 makes testing at extreme conditions possible without buying a larger, stand-alone chamber. The Espec BTX-475 can cycle temperatures at rates up to 5°C/minute without requiring liquid nitrogen. OPTIONS INCLUDED. Low Humidity Control System, Mobile cart with integrated humidity water tank and pump, web controller remote chamber ethernet port, Temperature & humidity sensor outputs for recorder, Product temperature control( can select product as primary control input), Emergency stop button, Viewing Window, and Two additional 4"cable ports. Inside Dimensions: 19.5"W x 15"D x 23.5"H 208V, 1Ph, 60Hz, 20A

• High performance and quiet operation (65 dBa)
• Space-saving footprint, designed for flush installation to wall
• Stainless steel exterior
• Full thermal break around doorframe
• One 50mm (2”) diameter cable port on left, with flexible silicone plug
• Three levels of overheat protection, plus overcool protection
• Easy lift-off service panels, electrical access on left
• Detachable eight-foot power cord with plug
• Humidity models include direct water supply connection for continuous operation (supply tank optional)
• ETL listed electrical panel conforming to UL 508A

Touch-screen programmer/controller with Ethernet

• Watlow F4T with touch-screen and Ethernet port standard
• Save 40 profiles with up to 50 steps each (ramp, soak, jump, auto-start, end)
• One event relay for external device control, plus specimen power interlock relay for safety

Genmark Robots. Serial numbers E0408 and E0196. Came with a set of spare parts for a sputtering system.

Geppert Engineering Vacuum Mixer. Approximate dimensions 13" diameter by 18" deep stainless steel chamber with a 1.5 HP 3450 rpm ac motor. 230V, 3Ph, 60Hz, 4A

MKS Granville Phillips 835100-YG-1D Vacuum Quality Monitor Gauge. Gauge used for RGA System. The Granville-Phillips® 835100-YG-1D Gauge for the VQM Vacuum Quality Monitor System measures 1 to 145 amu, with a demountable envelope. NEW, NEVER USED. 2 AVAILABLE

Granville Phillips 332 Vacuum Gauge Controller. P/N 20332-449

NEW! Huber Ministat 240 & Pilot One -45°C To +200°C Compact Cooling Bath Circulation Thermostat.

Huber Ministats are the smallest cooling circulator in the world. Their small dimensions allow Ministats to be placed in the smallest of spaces, for example in a laboratory fume cupboard or inside technical plant. Despite their minimal size the systems are extensively fitted out and offer sufficient performance for temperature control of photometers, refractometers, viscometers, distillation apparatus, reaction vessels and mini-plants. The main applications are using external applications however the bath opening allows objects to be thermoregulated directly in a thermostat bath. A powerful pressure/suction pump with an infinitely controlled rotational speed ensures optimal circulation. The maximum pressure can also be regulated by an optional pressure sensor, meaning that sensitive glass reactors and apparatus can reliably be protected from breakage. Additionally, Ministats offer the Pilot ONE controller as standard with a colour TFT display and comfortable operator guidance. Analogue connections according to NAMUR are available via the optional Com.G@te module allowing Ministats to integrate into plant and process control systems.