New Arrivals

Cascade Microtech Summit 11000 High Precision 200mm Manual Wafer Probe Station. Includes Microchamber Isoltion chamber. You make measurements inside an integral, low noise, shielded and light-tight microchamber. Roll out wafer stage for safe easy wafer loading. 200mm wafer chuck, Chuck is a temperature chuck but we don't have the controller. Z-lift range: 5.5mm linear lift with repeatability: 0<2 micron. X-Y stage travel: 203mm x 203mm with a resolution of 0.2” per turn.  Mitutoyo microscope with one long working distance objective. Microscope bridge with X-Y translation. Platen accepts vacuum or magnetic base probe manipulators. CE marking.

The Cee 1100FX Hot Plate is a programmable hotplate for baking resists coated on samples.  There are 10 user programs available which contain preset values for bake Ramp/Soak temperatures, bake time and bake method.  The bake method options are proximity, soft contact and hard contact.  Hard contact promotes best uniformity and minimizes bowing and warping of substrate.  Proximity bake provides slower heating of substrate which helps reduce blistering and cracking of films with fast drying solvents.  A recommended method is to use proximity bake as prebake and followed up by hard contact bake.  Each program allows up to three consecutive bake methods for maximum control of substrate warm up, solvent drying and resin curing characteristics. 

Specifications:
Bake temperature: 300 degrees C maximum
Bake temparature resolution:  1 degree C.
Substrate size: 150 to 300mm

240V, 1Ph,60Hz

Charles Ross TRM 4x8. Model 4 x 8 TRM, 3-Roll mill with volumes of product per hour – depending on materials and application. Equipped with (3) 4" in diameter x 8" long rollers powered by 1 Hp motor drive, with hand crank gap adjustment, scraper blades and 8" long working roll area. All (3) rolls made of hardened steel. Roller cooling with ¼" NPT inlet port for cooling medium and ¾" NPT outlet. Control panel has push button start, stop and e-stop chain. Mounted on heavy duty base frame. 230V, 3Ph, 60Hz

CINCINNATI SUB ZERO Z-8-1-1-H/AC Low Temperature Environmental Test Chamber. Digital programmable Watlow F4 controller. Watlow temperature limit controller. RS232 Communication port. Temperature Range: -68°C to +190°C. Inside Dimensions: 24” x 24” x 24”. Two 6” Cable ports. Glass viewport in door. 208V, 3 Ph, 60 Hz, 23A

Dage 4000-BS5KG-R Ball Shear 5KG Load Cell with Rotation. Tested Good.

Dage 4000-BS250 Ball Shear Linear Load Cell. Fully Tested. 4 AVAILABLE

Dage BS5KG 5 Kilo Gram Ball Shear Load Cell.

Dage 4000 TPAXY Modular Wire Pull/Die Shear Bond Tester. Intuitive operating screens enable quick test set up and editing of parameters. Motorized stage allows for semiautomatic bond testing. Currently configured with BS5KG 5 kilogram Ball Shear load cell. Other load cells for different applications may be available at additional cost, ask salesperson. StereoZoom microscope. 110V, 1 Ph, 50/60 Hz, CE

Denton Infinity 18 Optical Coating Evaporator for Antireflective Coatings. Cryopumped high vacuum system that performs resistive evaporation of silicon monoxide (SiO, Silicon (II) Oxide) films to provide an antireflective coating for backside analysis. The system has an integrated optical monitor to measure the surface reflectance of a silicon witness coupon at a specific wavelength. Pumpdown of the vacuum system can be automatic or manual control, inniation and termination of the deposition cycle are manual. The vacuum, coating power, and optical monitor systems are operated from the touch screen controller panel. The deposition itself is operated from the Telemark 860 Depostion Controller panel. Chamber size 18" x 23" x 36" inside. Includes roughing pump and cryopump compressor. 208V, 3Ph, 50/60Hz, 70A

Denton Vacuum DV-502A Dual Source High Vacuum Thermal Evaporator. Small compact laboratory sized thermal resistive deposition system. Can be configured with two wire basket type sources or a wire basket source and a carbon rod source. 1KVA transformers. Automatic pump down and vent controls. 12” diameter x 12” H bell jar with implosion guard. Turbo pump with roughing pump. Manual evaporation control. Built in vacuum gauges.