New Arrivals

Anritsu TOSLKF50A-20 Coaxial Calibration Kit; Type K(f); DC to 20 GHz; 50 ohms. The Anritsu TOSLKF50A-20 Kit is a compact, lightweight unit with Through, Open, Short, and Load K-type (f) ports for performing network analyzer calibration. 

TV Technologie SRO 702 IR Vacuum Reflow Brazing RTA. The perfect soldering systems, solder reflow ovens (SRO) with rapid thermal annealing and brazing capability are IR lamp heated multi-purpose cold wall process ovens. The SRO is ideal for R&D, process development as well for low to high volume production. Die attachment, IGBT/DBC, high vacuum encapsulation, MEMS package sealing, IR sensor/Crystal package sealing, wafer level
packaging, thermo electric cooler/Peltier, low moisture package sealing, high power LED, laser bar, Getter activation, alloying, wafer bump/solder ball reflow, pin fin heat sink, backing, flip chip, 3 D-CSP, diffusion bonding, CPV, thermo compression bonding, pin fins, Hybrid assembly, MMIC die attachment, power modules, electric vehicle controls, power solar cells. Temperature: up to 1100°C.  Fast heated plate ramping. Ramping up >3.5°C/sec. Ramping down >    2°C/sec. Rapid single wafer processing >    50°C/sec.  Heated Area: 147 x 217mm. 208V, 3 Ph, 60 Hz, 25A, CE.

BLUE M HS-1202-EFG Friction-Aire® Class 1, Group D Hazardous Materials Oven. Ideally suited for the testing and processing of hazardous materials, paints, solvents and lacquers. No heating elements in the chamber and no inherent hot spots to create potential danger. Max. Temp.: 150°C. Inside Dimensions: 25” L x 22” W x 19.5” H. 240V, 3 Ph, 60 Hz

Blue M DCC 256-C-MP550 Clean Room Oven. Digital programmable controller. Overtemperature protection control. Used Hepa filter. Purge gas input. Optional water jacket for faster cooling. Maximum Temperature 350°C. Inside Dimensions: 21” L x 20” W x 19½” H. 240V, 1 Ph, 60 Hz, 29A

Branson SW-200 Spin Welder. The Branson SW200 is a precision servo-driven spin welding system capable of welding circular parts with accurate control. It is easy to set up and operate. The SW200 is designed for use in manual, semi-automated, or fully-automated environments. A free-standing operator interface allows for the following adjustments: revolutions per minute (RPM), revolutions per cycle (RPC), and hold time (HT). Adjustable RPC (revolutions per weldcycle). This provides for consistent weld results. Rapid deceleration provides high-strength bonds. Adjustable hold time. Adjustable height (18"/457 mm) andstroke (up to 3.5"/89 mm) provide ease of setup. 208V, 1Ph, 60Hz, 20A

Branson Ultrasonics B950R Automatic Ultrasonic Vapor Degreaser. Branson B950R Ultrasonic Vapor Degreaser is the latest in a series of environmentally sound, cost effective precision degreasers. The B-Series is designed to comply with EPA environmental regulations on solvent emissions, an important environmental and economic consideration.

• Freeboard ratio of greater than 124% to eliminate diffusion losses
• Refrigerated primary condensing coil to condense the bulk of the solvent vapors
• Refrigerated sub-zero freeboard condenser to provide a cold air barrier minimizing fugitive losses
• Sliding cover to eliminate drafts and help seal the unit during periods of inactivity.
• Offset boiling sump with liquid level control
• Bag filter to minimize solvent loss during maintenance
• Cooled internal water separator to reduce losses
• Stainless plumbing for solvent-wetted areas
• Includes optional Automated hoist system with automated lid.
• 40 Khz Ultrasonics

Branson Ultrasonics B950R Automatic Ultrasonic Vapor Degreaser. Branson B950R Ultrasonic Vapor Degreaser is the latest in a series of environmentally sound, cost effective precision degreasers. The B-Series is designed to comply with EPA environmental regulations on solvent emissions, an important environmental and economic consideration.

Buchi Distillation Unit. Parts missing.

Buehler Vanguard® 2000 Fully Automatic Grinding-Polishing System. Fully automated means that samples can be prepared from start to finish without continuous operator involvement. Just load up to six samples at a time, select the preparation method, and step away. In as little as 15 to 20 minutes your samples will be finished; cleaned, dried, and ready for analysis. The Buehler Vanguard 2000’s microprocessor based system allows the user to select from six preinstalled methods or up to 44 individually created preparation methods.  After the method is started, the robotic arm automatically loads one of six selected platens onto the grinding-polishing base. Next, the automatic head places the samples on the platen while providing single or central load application. A fully integrated dispensing system automatically doses abrasive suspensions onto the  grinding/polishing surface.