Category Feed Subscribe to this Channel's RSS Feed

Evaporators

From thermal evaporators to high vacuum resistive evaporators, with various vapor deposition processes, knowing your evaporation systems are in excellent condition is important. When you need reliable evaporation, from carbon to metals, you need machinery you can trust - and that’s doubly true for second-hand equipment. You need to know your pre-owned refurbished evaporators aren’t going to let you down at a critical moment.

At Bid Service, we carry a wide range of on-site-refurbished second-hand evaporation chambers, systems and parts, including CHA evaporators and systems from the top manufacturers. Every used evaporator, part and system is fully tested, vetted and refurbished to our exacting standards. You can trust us to provide like-new, precisely recalibrated and, if necessary, updated evaporation equipment when you need it.

We endeavour to carry a full and comprehensive range of refurbished thermal and vacuum evaporation systems and more. As refurbishers and distributors of quality second-hand evaporators, our range can vary from time to time and we recommend browsing our site regularly, or getting in touch to find out if we’re carrying what you need.

We also buy used evaporators, so if you have any used equipment you wish to replace, or if you are moving, closing down a section of your operations, or need to sell a full operation, we will assess your second-hand equipment and make you an offer.

Used CHA SE-600-RAP

Inventory Number: 57536
Now (USD): $45,000.00

CHA SE-600-RAP Single Pocket E-Beam Evaporator. Used thin film deposition system. Inficon IC6000 crystal deposition monitor. Triple dome planetary for 3 in. wafers. Automatic or manual valve control. Diffusion pump. Motorized hoist. 19 in. dia. bell jar. Temescal CV-8 E-beam power supply with controls. Single pocket e-gun with shutter.

Product Details

Used CHA SE-600

Inventory Number: 57550
Now (USD): $49,500.00

CHA SE-600 High Vacuum E-Beam Evaporation System. Used thin film deposition system. PVD physical vapor deposition system. 19 in. dia. water cooled bell jar. Triple dome planetary fixturing currently configured for 3 in. dia. wafers. Inficon IC6000 crystal deposition rate monitor. Automatic valve sequencer. Four pocket E-gun with manual rotation control. Does not have auto pocket sequencer, manual only. Temescal CV-8 E-Beam power supply with controls. System uses a Varian VHS-6 diffusion pump for high vacuum.

Product Details

Used Denton Vacuum Infinity 18

Inventory Number: 64580
Now (USD): $59,000.00

Denton Infinity 18 Optical Coating Evaporator for Antireflective Coatings. Cryopumped high vacuum system that performs resistive evaporation of silicon monoxide (SiO, Silicon (II) Oxide) films to provide an antireflective coating for backside analysis. The system has an integrated optical monitor to measure the surface reflectance of a silicon witness coupon at a specific wavelength. Pumpdown of the vacuum system can be automatic or manual control, inniation and termination of the deposition cycle are manual. The vacuum, coating power, and optical monitor systems are operated from the touch screen controller panel. The deposition itself is operated from the Telemark 860 Depostion Controller panel. Chamber size 18" x 23" x 36" inside. Includes roughing pump and cryopump compressor. 208V, 3Ph, 50/60Hz, 70A

Product Details

Used Denton Vacuum DV502A

Inventory Number: 64970
Now (USD): $12,000.00

Denton Vacuum DV-502A Dual Source High Vacuum Thermal Evaporator. Small compact laboratory sized thermal resistive deposition system. Can be configured with two wire basket type sources or a wire basket source and a carbon rod source. 1KVA transformers. Automatic pump down and vent controls. 12” diameter x 12” H bell jar with implosion guard. Turbo pump with roughing pump. Manual evaporation control. Built in vacuum gauges. 

Product Details

Used Kurt J. Lesker LXLT-42010

Inventory Number: 63924
Now (USD): $950.00

Kurt J Lesker LXLT-42010 Low Temperature Evaporation Source. LTE power supply and Thermal Evaporation Source. No cables.

8 AVAILABLE

Product Details

Used Miscellaneous Deposition Source

Inventory Number: 63173
Now (USD): $3,950.00

Miscellaneous Deposition Source. Effusion Cell with Power Supply. Item has shutter and deposition source. Power supply with temperature controller. 4.5 in. OD conflat flange. 120V, 50/60 Hz, CE.

Product Details

Used Miscellaneous Deposition Source

Inventory Number: 63181
Now (USD): $3,950.00

Miscellaneous Deposition Source. Effusion Deposition Source with Power Supply. Includes power supply with temperature controller. Deposition source with shutter. 4.5 in. OD conflat flange.

Product Details

Used Miscellaneous Deposition Source

Inventory Number: 63182
Now (USD): $3,950.00

Miscellaneous Deposition Source. Effusion Deposition Source with Power Supply. Includes power supply with temperature controller. Deposition source with 4.5 in. OD conflat flange.

Product Details

Used Miscellaneous Deposition Source

Inventory Number: 63183
Now (USD): $3,950.00

Miscellaneous Deposition Source. Effusion Deposition Source with Power Supply. Includes power supply with temperature controller. Deposition source with 4.5 in. OD conflat flange.

Product Details

Used Para Tech Labtop 3000

Inventory Number: 64770
Now (USD): $12,950.00

Para Tech LabTop 3000 Compact Bench Top Parylene Conformal Coating System. The compact LabTop by Para Tech is designed for coating small substrates and modules in laboratory, R&D and short run production settings. Its 8” by 9” stainless steel chamber can also accommodate larger devices for prototyping and research and development applications. Features the same automated process features and vacuum coating precision as full size Para Tech coating systems. Ideal for application development as well as short run production coating of printed circuit boards, medical components, electronic sensors and other small substrates. Tangential entry and exit of the polymerizing monomer results in an extremely low coating thickness gradient as well as superior film uniformity. Produces very thin Parylene film for optical applications and microwave components.  CE compliant.

Product Details