Used Kurt J. Lesker LXLT-42010

CHA Bell Jar. Stainless steel. 25.75 in. OD, 29 in. tall.

CHA SE-600-RAP Single Pocket E-Beam Evaporator. Used thin film deposition system. Inficon IC6000 crystal deposition monitor. Triple dome planetary for 3 in. wafers. Automatic or manual valve control. Diffusion pump. Motorized hoist. 19 in. dia. bell jar. Temescal CV-8 E-beam power supply with controls. Single pocket e-gun with shutter.

CHA SE-600 High Vacuum E-Beam Evaporation System. Used thin film deposition system. PVD physical vapor deposition system. 19 in. dia. water cooled bell jar. Triple dome planetary fixturing currently configured for 3 in. dia. wafers. Inficon IC6000 crystal deposition rate monitor. Automatic valve sequencer. Four pocket E-gun with manual rotation control. Does not have auto pocket sequencer, manual only. Temescal CV-8 E-Beam power supply with controls. System uses a Varian VHS-6 diffusion pump for high vacuum.

Miscellaneous Deposition Source. Effusion Cell with Power Supply. Item has shutter and deposition source. Power supply with temperature controller. 4.5 in. OD conflat flange. 120V, 50/60 Hz, CE.

Miscellaneous Deposition Source. Effusion Deposition Source with Power Supply. Includes power supply with temperature controller. Deposition source with shutter. 4.5 in. OD conflat flange.

Miscellaneous Deposition Source. Effusion Deposition Source with Power Supply. Includes power supply with temperature controller. Deposition source with 4.5 in. OD conflat flange.

Miscellaneous Deposition Source. Effusion Deposition Source with Power Supply. Includes power supply with temperature controller. Deposition source with 4.5 in. OD conflat flange.

Kurt J Lesker MAPS LTE Low Temperature Thermal Evaporations Sources. Two MAPS LTE power supplies each with a low temperature Evaporation source. Includes shutter assembly. No cables. 5 Sets Available.

Edwards E306 Compact Thermal Deposition Evaporator.Laboratory size self-contained thermal evaporator. Quartz Chamber: 12” dia. Built in gauges and power supply. Single thermal source. 208V, 1Ph, 60Hz, 11A

Denton Infinity 18 Optical Coating Evaporator for Antireflective Coatings. Cryopumped high vacuum system that performs resistive evaporation of silicon monoxide (SiO, Silicon (II) Oxide) films to provide an antireflective coating for backside analysis. The system has an integrated optical monitor to measure the surface reflectance of a silicon witness coupon at a specific wavelength. Pumpdown of the vacuum system can be automatic or manual control, inniation and termination of the deposition cycle are manual. The vacuum, coating power, and optical monitor systems are operated from the touch screen controller panel. The deposition itself is operated from the Telemark 860 Depostion Controller panel. Chamber size 18" x 23" x 36" inside. Includes roughing pump and cryopump compressor. 208V, 3Ph, 50/60Hz, 70A