Used BYK Gardner HAZE-GLOSS 4601

Wilson Rockwell 643-T Hardness Tester

BYK Gardner Micro-Gloss 20° Gloss Meter for High Gloss.

Atlas XENOTEST BETA + Xenon Arc Weathering Testing System. The Xenotest Beta+ is a premium stand-alone rotating rack xenon instrument with 4000cm2 exposure area. It comes with a complete set of parameter controls. Irradiance and temperature are measured and controlled directly on the sample level using on-rack XENOSENSIV sensor technology. The Beta+ complies with the vast majority of industry standards. Due to its large test chamber and highly reliable performance, it‘s ideal for larger capacities or sample sizes.

          400 Volts, 3Phase, 50/60 Hertz

• 3x 2200 W air-cooled Xenon Lamps
• 4000 cm² exposure area
• High-irradiance testing up to 120 W/m² (2 Sun)
• Touch screen with colour display to monitor and display test parameters
• Direct Setting and Control of Irradiance (300-400 nm)
• Direct Setting and Control of Black Standard Temperature
• Direct Setting and Control of Chamber Temperature
• Direct Setting and Control of Relative Humidity
• Display of Diagnostic Messages
• Storage for 10 user-defined test methods
• Pre-programmed international standard test methods
• Multilingual User Interface
• Non-aging XENOCHROME filters to simulate outdoor daylight, daylight behind window
• On-rack XENOSENSIV 300-400 nm for measuring and controlling irradiance (in W/m²) and BST (°C) on sample level
• Selectable temperature control either by Chamber Temperature (max. 70 °C) or by Dual Control: Chamber Temperature and Black Standard Temperature (up to 130 °C)
• Fan-controlled temperature difference between Chamber and Black Standard Temperature
• Ultrasonic humidification system for humidity control
• Specimen spray system with integrated 60 l water reservoir

Atlas SUNTEST XXL+ Xenon Lamp Weathering and Lightfastness Test Chamber. The SUNTEST XXL+ is used to check for property changes of materials and products caused by sunlight, temperature and moisture in a short period of time. The aging which happens outdoors or indoors over months or years, such as fading, yellowing or loss of strength, can often be simulated within weeks inside a SUNTEST.

• Dimensions 90 x 91 x 172 cm
• Exposure area 79 x 39 cm (3000 cm²)
• 3 air-cooled 1700 W xenon lamps
• Easy-to-use touch screen user interface with 13 selectable languages
• Direct setting and control of irradiance at 300-400 nm or 340 nm
• Direct setting and control of Black Standard Temperature (BST) or Black Panel Temperature (BPT)
• Direct setting and control of chamber temperature (CHT)
• Direct setting of tolerance ranges for each test parameter for optimum test control
• Display of diagnostic messages
• 10 free programmable tests possible with up to 12 phases
• Pre-programmed polymer and coatings standards for Quick-starters
• Horizontal 3000 cm² exposure area for 34 standard or multiple 3-D specimens
• Premium sunlight simulation according to CIE85 reference sun
• Lamp cassette with aluminum reflector, lamp connections and filter slot
• Outer filter with IR-reflective coating
• Irradiance range 30-65 W/m2 (300-400 nm); 0.26-0.62 W/m² (340 nm)
• Measurement and control of CHT: max. 70 °C (during light phase)
• Measurement and control of BST or BPT: max. 100 ºC (during light phase)
• BST sensor design according to ISO 4892-1
• Selectable temperature control either by CHT or by dual control: CHT and BST (BPT) simultaneously
• Controlled temperature difference between CHT and BST (BPT)
• Ultrasonic humidification system for humidity control
• Specimen spray system with integrated 60 l water reservoir
• 5° tilted specimen test plane for spray water draining
• Access port ca. 30 x 25 mm to connect external sensors inside the test chamber
• Switch-off by radiant exposure, light exposure time or total operating time
• Advanced auto-start functions
• Data output via memory card or RS 232
• Internal memory chip for storing instrument data

210V, 3Ph, 50/60Hz

BYK Gardner Micro-Gloss 20° Gloss Meter for High Gloss.