Whether you need a replacement probe tip or a full probe station, you need quality, accuracy and reliability in your lab, especially when you are sourcing used or second-hand equipment. You need to know that your cascade probe station or microtech system is up to the task and will provide consistent, precise readings every time.

At Bid Service, we source, restore and refurbish used semiconductor probe stations and sell them to you at affordable prices. Every used probe station or replacement part is thoroughly vetted, tested and certified before it leaves our warehouse, offering you consistent quality across your operation.

We endeavour to carry a full and comprehensive range of refurbished cascade probe stations, replacement parts and more. As refurbishers and distributors of quality second-hand probe stations, our range can vary from time to time and we recommend browsing our site regularly, or getting in touch to find out if we’re carrying what you need.

We also buy used probers, so if you have any used equipment you wish to replace, or if you are moving, closing down a section of your operations, or need to sell a full operation, we will assess your second-hand equipment and make you an offer.

Used Cascade Microtech MH-2

Inventory Number: 62939
Now (USD): $950.00

Cascade Microtech MH-2 Precision Vacuum Base Probe Manipulator. X-Y-Z travel. Vacuum base.

Product Details

Used Cascade Microtech REL-4800

Inventory Number: 62982
Now (USD): $29,500.00

Cascade Microtech REL-4800 Precision Manual Prober with New Wave Laser Trimmer. Manual parametric probe station combines precision sub-micron probing capability with superior measurement performance necessary for DC/CV analysis. The station features sub-micron resolution, precise motion control and 8-inch travel. Vacuum Chuck: 8 in. dia. Platen accepts vacuum or magnetic base probe manipulators. Mitutoyo microscope with three long working distance objectives APO10X, MPlan APO 20X and MPlan Nuv 50. New Wave Research EzLaze II laser cutting system 532/355. User selectable wavelengths 532nm and 355nm. 532nm for copper, gold, aluminum and polysilicon. 355nm for polyimide, katpon, silicon, nitride, SOG,silicon oxide. Uniform cuts from 50  x 50 micrometers with 50X objective. Three Trigger Modes: Single-shot, 1 Hz, or burst 5 Hz to facilitate faster material removal. 100-240V, 50/60 Hz, CE.

Product Details

Used Cascade Microtech 115-418

Inventory Number: 63017
Now (USD): $2,500.00

Cascade Microtech 115-418 Probe Card Holder. Custom built for 11/12K station.

Product Details

Used Cascade Microtech Summit 12561B

Inventory Number: 63026
Now (USD): $49,000.00

Cascade Microtech Summit 12561B 8-inch Semiautomatic Analytical Probe Station. You make measurements inside an integral, low noise, shielded and light-tight microchamber. The Summit 12000 Series assures access to the full measurement range offered by todays top test instrumentation. Easy to use graphical user interface guides you through testing tasks. 8-inch dia. chuck with 203mm x 203mm travel with a resolution of 0.1 micron and an accuracy of less than or equal to +/- 2 micron. 115/230V, 50/60 Hz, 4/2A, CE.

Product Details

Used Cascade Microtech 12000

Inventory Number: 63040
Now (USD): $45,000.00

Cascade Microtech 12000 8-inch Semiautomatic Analytical Probe Station. You make measurements inside an integral, low noise, shielded and light-tight microchamber. The Summit 12000 Series assures access to the full measurement range offered by todays top test instrumentation. Easy to use graphical user interface guides you through testing tasks. 8-inch dia. chuck with 203mm x 203mm travel with a resolution of 0.1 micron and an accuracy of less than or equal to +/- 2 micron. 115/230V, 50/60 Hz, 4/2A, CE.

Product Details

Used Cascade Microtech 11000

Inventory Number: 63233
Now (USD): $25,000.00

Cascade Microtech 11000 High Precision Manual Wafer Prober with Temperature Chuck. Lets you test wafers or substrates up to 150mm in diameter. This prober manually controls X-Y and Z movements. 150mm Temperature Chuck, -65°C to +200°C. Unit includes Microchamber™ enclosure. Lamplink power supply needs repair.

Product Details

Used Cascade Microtech REL-6100

Inventory Number: 63238
Now (USD): $8,500.00

Cascade Microtech REL-6100 Manual 200mm Prober without Microscope. Precision prober can operate X-Y-Z axis manually. Precision sub-micron probing capability. Platen accepts vacuum or magnetic base probe manipulators. 8-inch dia. wafer chuck with 203mm x 203mm X-Y travel and a resolution of 0.2µm. No microscope.

Product Details

Used Electroglas Horizon 4085X

Inventory Number: 41740
Now (USD): $5,000.00

Electroglas Horizon 4085X 8-inch Automated Prober. High volume cassette to cassette wafer prober. Pattern recognition system.  Sold As Is.

Product Details

Used HP E7352L

Inventory Number: 63119
Now (USD): $8,500.00

HP E7352L 110 GHz Test Head High Frequency Probe. Test fixture 110 GHz frequency test head for use with the 8510 network analyzer systems. This unit was mounted on a Cascade wafer prober and has the mounting assembly for the prober as seen in photo.

Product Details

Used Integrated Technology Corp. PB500A

Inventory Number: 50143
Now (USD): $6,500.00

Integrated Technology Corp. PB500A Probe Card Repair and Analysis Station. Computer controlled system fully tests and exercise the probe card and allows complete statistical monitoring of probe card performance. Planarization, current leakage and resistance testing. Full database kept on each probe card for statistical process control.

Product Details