Category Feed Subscribe to this Channel's RSS Feed

Evaporators

From thermal evaporators to high vacuum resistive evaporators, with various vapor deposition processes, knowing your evaporation systems are in excellent condition is important. When you need reliable evaporation, from carbon to metals, you need machinery you can trust - and that’s doubly true for second-hand equipment. You need to know your pre-owned refurbished evaporators aren’t going to let you down at a critical moment.

At Bid Service, we carry a wide range of on-site-refurbished second-hand evaporation chambers, systems and parts, including CHA evaporators and systems from the top manufacturers. Every used evaporator, part and system is fully tested, vetted and refurbished to our exacting standards. You can trust us to provide like-new, precisely recalibrated and, if necessary, updated evaporation equipment when you need it.

We endeavour to carry a full and comprehensive range of refurbished thermal and vacuum evaporation systems and more. As refurbishers and distributors of quality second-hand evaporators, our range can vary from time to time and we recommend browsing our site regularly, or getting in touch to find out if we’re carrying what you need.

We also buy used evaporators, so if you have any used equipment you wish to replace, or if you are moving, closing down a section of your operations, or need to sell a full operation, we will assess your second-hand equipment and make you an offer.

Used Kurt J. Lesker Organics Thermal Evaporator

Inventory Number: 61412
Now (USD): $45,000.00

Organic Material Deposition System with Glove Box Isolation. Previously used to produce organic light emitting diodes OLED. Completely manual operation of all evaporation controls. Inficon crystal deposition monitors in each source chamber. Chamber number one is set up for resistive evaporation of metals with three thermal sources at the bottom of a single well. The second chamber has three thermal source wells. Each 10 in. dia. well contains three Kurt Lesker LTE low temperature coil type organic evaporation sources. The distance from the source to the substrate carrier is about 31 in. The substrate carrier can be manually rotated from source well to source well. The substrates are transferred from chamber one to chamber two via a manual transfer arm through a gate valve. Each chamber has its own high vacuum CTI 8 cryopump with compressor. Vacuum Atmospheres Nexus glove box with moisture monitor and trace oxygen analyzer. Also includes OC-1 vacuum oven and Dri-Train purification system with blower. Very nice system for research or light production. Sold As Is. 

Product Details

Used Miscellaneous Bell Jar

Inventory Number: 61491
Now (USD): $1,250.00

Water Cooled Vacuum Bell Jar. Previously used on a CHA 1000 system. 25-3/4 in. dia. x 30 in. H. Water cooled.

Product Details

Used Miscellaneous Bell Jar

Inventory Number: 61884
Now (USD): $950.00

Inside Diameter: 18 in. Outside Diameter: 20 in. No sight glass. Stainless steel construction.

Product Details

Used Temescal FC-1800

Inventory Number: 53808
Now (USD): $69,000.00

Load-Locked Electron Beam Evaporator with Substrate Heaters. Used thin film deposition system. This fast cycle load-locked evaporator brings the bell jar down to operator level without sacrificing the throw distance. Cryo pumped high vacuum system with roughing pump. 4 pocket gun with Temescal CV-8 power supply. Inficon IC4 Desposition monitor. Bell Jar: 19-1/2 in. ID. Single substrate dome 17 in. dia. with rotation control. Includes substrate heaters. Auto valve sequencer.

Product Details

Used Temescal BJD-1800

Inventory Number: 55181
Now (USD): $59,000.00

Electron Beam Evaporator. Used thin film deposition system. Maxtek crystal deposition rate monitor. Four pocket E-Gun. CV-14 E Beam power supply with sweep controls. Vacuum gauges. CTI cryopump with compressor and roughing pump. Does not have substrate heaters.

Product Details

Used Temescal BJD-1800

Inventory Number: 55702
Now (USD): $49,000.00

4 Pocket E-Beam Evaporator Upgraded by TES. Used thin film deposition system. Inficon XTC/2 crystal deposition monitor/controller. Three dome planetary configuration for 3 in. wafers. Rotation control. All system components mounted in cabinet except cryo compressor. CTI cryopump compressor with roughing pump. Auto valve controller. 4 pocket e-gun with turret source selector. Niles Electronics NE-6 E-Beam power supply. X-Y sweep controller. Water cooled 17.5 in. ID bell jar.

Product Details

Used Temescal BJD-1800

Inventory Number: 57141
Now (USD): $59,000.00

E-Beam Vacuum Deposition System. Used thin film deposition system. Bell jar style E-Beam evaporator. 6 pocket e-gun with source selector. Temescal Simba E-Beam power supply with power and sweep controls. Inficon IC6000 crystal deposition rate monitor (can be upgraded to newer model at additional cost). Quartz lamp substrate heaters. Single lift off dome with rotation control. CTI-8 cryopump with compressor and roughing pump. 208V, 3 Ph, 60 Hz.

Product Details

Used Temescal BJD-1800

Inventory Number: 57373
Now (USD): $125,000.00

PC/PLC Controlled High Vacuum E Beam Evaporator with Ion Tech Ion Milling Source. Used thin film deposition system. PC/PLC controller with graphical color display. Provides fully integrated process and vacuum control, recipe driven pump and vent processing and automatic pump, vent and regeneration cycles. Low profile bell jar design for easy substrate loading. Currently configured with custom double sided substrate holder. Holds four substrates face down when motor turns clockwise and flips substrates when direction changes. Quartz substrate heaters. Crystal deposition controller. Four pocket e-gun with Simba power supply. Cryopump with compressor and roughing pump.

Product Details

Used Temescal VES-2550

Inventory Number: 57476
Now (USD): $85,000.00

E-Beam Evaporation System with Two Four Pocket E-Guns. Used thin film deposition system dual egun evaporator. Inficon IC4 crystal deposition monitor. Two four pocket electron guns with rotation controller. Temescal CV-8 E-Beam power supply. Currently configured with single fixed dome for 3 in. substrates (see photo). Water cooled 25 in. ID chamber. Automatic or manual valve control. CTI cryopump with compressor and roughing pump.

Product Details

Used Temescal FC-1800

Inventory Number: 57605
Now (USD): $59,000.00

E-Beam Thin Film Evaporator with Substrate Heaters and Deposition Rate Controller. Used thin film deposition system. System has a load lock for fast cycling or wafers. Water cooled stainless steel bell jar. Currently configured with lift-off dome for 4 in. dia. wafers. Quartz substrate heaters. Automatic or manual valve controls. Crystal film thickness monitor. CV-8 8 kW e-beam power supply with sweep controller. 4 pocket e-gun with pocket selector. Cryopump and roughing pump. Special Price.

Product Details