Category Feed Subscribe to this Channel's RSS Feed

Furnaces - Autoclaves

When you’re sourcing used lab furnace equipment and autoclaves, you need to know that you’re getting absolute precision, consistency, uniformity and reliability across the board, whether you’re buying a full system or replacement parts. Your used furnace should be as trustworthy as a brand-new system.

Bid Service sources and refurbishes quality used furnaces, including diffusion furnaces, zone belt furnaces, tube furnaces and more. We also source second-hand parts, including furnace tubes. We then restore and refurbish each used furnace to factory standards, providing you with affordable, like-new used lab furnace equipment.

We endeavour to carry a full and comprehensive range of refurbished heat treat systems, autoclaves and more. As refurbishers and distributors of quality second-hand furnaces, our range can vary from time to time and we recommend browsing our site regularly, or getting in touch to find out if we’re carrying what you need.

We also buy used equipment, so if you have a used furnace for sale that you wish to replace, or if you are moving, closing down a section of your operations, or need to sell a full operation, we will assess your second-hand equipment and make you an offer.

Used Anhui BEQ BTF-1200C

Inventory Number: 60680
Now (USD): $3,500.00

The BTF-1200C split vacuum tube furnace uses resistance coil wire as its heating element. The furnace is built with AI2O3 fiber materials controlled by high temperature controller with an accuracy of +/-1 deg C and 40 programmable segments up to 1200 deg C. Tube dimensions are 4 in. x 17 in. Electrical requirements: 220V, 1 Ph.

Product Details

Used Blue M 8850D-1

Inventory Number: 58581
Now (USD): $3,250.00

Box Furnace. Digital programmable controller. Max. Temp.: 1093 deg C. Inside Dimensions: 10 in. L x 18 in. W x 10 in. H. 480V, 3 Ph, 60 Hz.

Product Details

Used Bruce BDF-41

Inventory Number: 60737
Now (USD): $18,000.00

Four Stack Diffusion Furnace. Horizontal batch furnace. 7355X control units. 2962079 - Max. Temp.: 1000 deg C. Tubes: 9 in. ID. Sold untested As Is.

Product Details

Used BTU VIP98N

Inventory Number: 46275
Now (USD): $19,000.00

PC Controlled 7 Zone Belt Furnace. Max. Temp.: 300 deg C. Dual track edge conveyor. Belt width: 22 in. Product clearance above belt: 2 in. Heated length: 98 in. Furnace atmosphere: N2/air. Overall furnace length: 18 ft. 480V, 3 Ph, 50/60 Hz.

Product Details

Used Carbolite GZF-12-151-1092

Inventory Number: 61529
Now (USD): $4,500.00

1200 deg C Tube Furnace with 6-inch Bore. Three zone 1200 deg C tube furnace. Eurotherm 2416 digital controller. Inside Heated Area: 6 in. dia. x 44 in. Max. Temp.: 1200 deg C. 440/264V, 3 Ph + N, 50/60 Hz, 13.5A.

Product Details

Used CM Furnaces Inc. 1710FL

Inventory Number: 60850
Now (USD): $6,500.00

Rapid Temperature 1700 deg C Lab Furnace. Inside Dimensions: 8.5 L x 10 W x 8 D. Max. Temp.: 1700 deg C. The CM 1700 Series offer rapid heating and cooling rates, uniform temperature control, compactness and sturdy construction for long term use. Used for ceramics, glass, powders, lab research, materials testing, thermal cycling, sintering, annealing, firing and calcining. 480V, 1 Ph, 60 Hz, 21A.

Product Details

Used Conceptronic HVC 70 SERIES

Inventory Number: 52334
Now (USD): $9,500.00

Forced Convection Reflow Soldering System. High velocity/low volume gas management results in higher heat transfer rates at lower gas setpoint temperatures, superior gas segregation between zones and lower power consumption. 5 vertical heating regions. 24 in. wide belt. Heated Chamber: 70 in. L. PC controller. 440V, 3 Ph, 50/60 Hz, 66A.

Product Details

Used Hitech Furnaces Ltd. 119HC251 8-AF

Inventory Number: 60814
Now (USD): $1,250.00

Furnace Tube. No controller or thermocouples, furnace tube only. Max. Temp.: 1300 deg C. Inside Diameter: 9-1/2 in.  64 in. long.

Product Details

Used Hitech Furnaces Ltd. H4-6218

Inventory Number: 60844
Now (USD): $19,500.00

Four Stack Tube Furnace. Max. Temp.: 1300 deg C. Four tubes 7 in. dia. ID x 52 in. L. Sold As Is Untested.

Product Details

Used Jipelec SiC Furnace

Inventory Number: 58065
Now (USD): $15,000.00

High Temperature Batch Furnace. Designed to provide high temperature uniformity and long process capability. Temp. Range: 700 deg C to 2000 deg C. Ramp Rate: Up to 15 deg C/s. Pyrometer Control: 500 deg C to 2000 deg C. For small substrates up to 2 in. dia. Can be used with vacuum pump, not included. 208V, 3 Ph, 60 Hz, 67A, CE.

Product Details