Equipment Photos

Equipment Details

Inventory Number: 62308
Category: Wafer Analysis
Manufacturer: KLA Tencor

SOLD AS IS. UNIT DOES NOT HAVE A PC. PARTS NOT WORKING.

Surface Profiler. Unit does not have a PC. The P-6 surface profiler features an unprecedented range of features and capabilities in a mid-range general purpose instrument. A variety of options are available to enhance the capabilities of the standard system. Stylus Profiling: The precision scan stage design enables high quality scans over the entire 6 in. sample stage area with up to 150 mm scan length and 1 mm Z range. This design ensures the highest quality 2D scans resulting in a higher level of metrology quality. Step Height Repeatability: A step height repeatability of 6 angstrom or 0.1 percent (1s ), a noise floor below 1nm RMS as measured on the scan stage, and a sub-Angstrom resolution capacitance sensor translates into the most repeatable, and sensitive ultra-thin film step measurements,roughness/waviness measurements and accurate curvature reproduction. Parts not working.

Now (USD): $12,000.00

Products Similar to: KLA Tencor P-6

Used Modular Process Technology RTP-600S

Inventory Number: 61828
Now (USD): $19,500.00

Rapid Thermal Processing System. The integrated process control system features real time graphics, recipe management, data aquisition and has a comprehensive diagnostic function. Wafer size up to 6 in. Temp. Range: 250 to 1300 deg C. Quartz chamber. Up to six channels of MFC control. Highly uniform loop array with accurate control and monitoring. 208V, 3 Ph, 60 Hz, 80A.

Product Details

Used Modular Process Technology RTP-600S

Inventory Number: 61866
Now (USD): $19,500.00

Rapid Thermal Processing System. The integrated process control system features real time graphics, recipe management, data aquisition and has a comprehensive diagnostic function. Wafer size up to 6 in. Temp. Range: 250 to 1300 deg C. Quartz chamber. Up to six channels of MFC control. Highly uniform loop array with accurate control and monitoring. 208V, 3 Ph, 60 Hz, 80A.

Product Details

Used August Technology NSX-85

Inventory Number: 57564
Now (USD): $45,000.00

Automated Defect Inspection System. Inspection of whole wafers, sawn wafers, JEDEC trays, Auer boats, die in gel/waffle paks, MCM’s. Detects defects down to 0.5 micron. Automated wafer mapping and identification. Automated data collection and reporting. Menu-based, easy to use Windows environment. 200-240V, 1 Ph, 50/60 Hz, 5A, CE.

Product Details

Used Cyberoptics Cyberscan 200

Inventory Number: 50584
Now (USD): $4,950.00

Non-Contact Profile Measurement System. Uses laser triangulation to analyze two dimensional data. Non-contact measurement allows you to work with wet and fragile samples. PC controller analyzes data. Motorized stage. 120V, 60 Hz.

Product Details

Used Daini Seikosha SFT/156

Inventory Number: 34297
Now (USD): $250.00

Fluorescent X-Ray Measurement System. X-Y Stage: 3 in. x 3 in. Travel Z. Adjustment: 1.3 in. Min. Measurement area: .005 in. Sold AS IS.

Product Details

Used Wyko BP2000W

Inventory Number: 39319
Now (USD): $39,000.00

Bump Measurement Profiling System. The right inspection tool for flip-chip process control. Repeatably measures solder bump heights, from 150 micro-meters or more for standard flip-chip bumps down to a few microns for under-bump metalization pads, as well as provides volume data on all bump sizes. Non-contact 3-D data on all size bumps over the entire wafer. The system calculates bump height, width, volume and coplanarity. Automatically detects bump position, solder bridges, and missing and extra solder bumps, with prominent display of pass/fail results and position statistics at the bump, die,wafer and lot level. Powerful measurement analysis, generating output as 2-D cross sections, contour plots, bearing ratio plots, or 3-D images. A built in Wizard allows quick measurement set-up.

Product Details

Used Zygo SXM300

Inventory Number: 46204
Now (USD): $12,500.00

Multimode Scanning Probe Microscope. The Magnascope SXM300 is a multimode probe microscope that measures sub-micron features to near angstrom-level resolution. It is designed for critical-dimension measurements of height, width, roughness and sidewall angles of 300mm wafers and masks of up to 9 in x 9 in. Sold As Is.

Product Details

Used Zygo 5600

Inventory Number: 29714
Now (USD): $2,500.00

Maxim 3D Laser Interferometric Microscope. PARTS SYSTEM.

Product Details

Used CDE Resmap 178

Inventory Number: 55143
Now (USD): Contact for Price

THIS UNIT IS SOLD. WE WOULD LIKE TO BUY YOUR CDE SYSTEMS. PLEASE CONTACT US IF YOU HAVE SYSTEMS TO SELL. * * * * * * * * * * * * * * * * * * * * * * * * * * Four Point Probe Resistivity Measurement System. Four point probe system for mapping resistivity on substrates from 2 in. to 8 in. dia. Manual loading of subtrates. Measurement Range: 2 milliohms/sq. to 5 megaohms/sq. Polar maps, rectangular maps, line scan or user defined patterns. 115/230V, 60 Hz.

Product Details

Used Tousimis  Automegasamdri 915B

Inventory Number: 55992
Now (USD): Contact for Price

THIS UNIT IS SOLD. WE WOULD LIKE TO BUY YOUR TOUSIMIS SYSTEMS. PLEASE CONTACT US IF YOU HAVE SYSTEMS TO SELL. * * * * * * * * * * * * * * * * * * * * * * * * * * Supercritical 6 in. MEMS Wafer Critical Point Dryer. Microprocessor controller allows for complete automatic processing. Repeatable operating parameters. Chamber Size: 6.50 in. ID x 1.25 in. D. Can process up to 5 pieces of either 6 in., 4 in., 3 in., 2 in. wafers or 10mm sq. die per process run. LCO2 flow is controlled through micro. 120V, 50/60 Hz.

Product Details