Equipment Photos

Equipment Details

Inventory Number: 60644
Category: Cleaning Systems
Manufacturer: Branson

Ultrasonic Vapor Degreaser. The Branson B-Series Ultrasonic Vapor Degreasers are a series of environmentally sound, cost effective precision degreasers. The B-Series is designed to comply with EPA environmental regulations on solvent emissions, an important environmental and economic consideration. Freeboard ratio of 100 percent to minimize diffusion losses due to drafts. Sub-zero freeboard condenser to provide a cold barrier minimizing emissions. Recirculating pump and filter to remove particulate and extend solvent life. Working Dimensions: 10 in. x 12 in. x 8 in. D. Boil Sump Heat: 2000W immersion heat. Ultrasonic Heat: 400W. Ultrasonics: 40 kHz. Distillation Rate: 7 gph. Recirculation: 1 gpm. Load Capacity: 200 lbs. steel/hour. Vapor Zone: 28.7 in. x 15 in. x 8.5 in. D. Solvent Capacity: 9.2 gals. Input Power: 208 or 230V, 3 Ph, 27A.

Now (USD): $14,950.00

Products Similar to: Branson B452RS

Used EMC 12A Eagle

Inventory Number: 33427
Now (USD): $9,500.00

Flexible Batch Cleaning System. Wash chamber accommodates up to 12 in. x 12 in. x 12 in. parts basket. Heated spray under immersion wash cycle. Heated open spray rinse cycle. Open loop final rinse. Internal filtration to 1 micron. Forced hot air convection drying. Mfg. 1997.

Product Details

Used Branson MU 2112-40-24S

Inventory Number: 43793
Now (USD): $650.00

Ultrasonic Tank. Tank only, no controller. 24 element 40 kHz. Inside Dimensions: 21 in. L x 12 in. W x 14 in. H.

Product Details

Used Semitool STI PA72-40MB-0603

Inventory Number: 44013
Now (USD): $950.00

Semitool 4 in. Single Bolt Rotor.

Product Details

Used Global Processing MASP TTTT

Inventory Number: 46882
Now (USD): $8,500.00

4 Inlet Thermal Oxide Scrubber.

Product Details

Used EDC 100

Inventory Number: 51023
Now (USD): $2,500.00

Exclusive Design Co. Rigid Disk Cleaning System. Uses brushes and surfactant to scrub disks. LCD display. Analog control of scrub/rinse speed and spin dry speed. 115V, 60 Hz.

Product Details

Used Accu-Fab Systems ECO-SNOW

Inventory Number: 52338
Now (USD): $25,000.00

CO2 Precision Surface Cleaning System. For removing micron and submicron particulate and organic contamination using carbon dioxide. When aimed at a contaminated surface the CO2 snow particles dislodge particles and remove thin film organic residues. Removing post-etch veils by momentum transfer or metal lift-off by thermal contraction and momentum transfer. Removes organic film by solvation. Cassette to cassette operation.

Product Details

Used Yieldup Omega 6200

Inventory Number: 52683
Now (USD): $29,000.00

Megasonic Wafer Cleaning System. Robot assist between 2 tanks. Set up for 2 - 200 mm cassettes. Tank 1: 11 in. L x 20 in. W x 15 in. H is a quartz megasonic tank with 3 - 600W KAJO megasonic generators. Tank 2: 12 in. L x 20 in. W x 14 in. H is a YieldUp dryer tank with N2 purge and gas injection capability. Overall Dimensions: 60 in. L x 60 in. W x 88 in. H. Mfg. Date: 12/97.

Product Details

Used Fluidix SX-60

Inventory Number: 52741
Now (USD): $950.00

High Speed Water Heater. Digital controller with audible alarms. Max. Pressure: 75 psi. 480V, 3 Ph, 60 Hz, 73A. Previously used on ultrasonic cleaning line.

Product Details

Used Crest Ultrasonics OC4-1218-HE

Inventory Number: 54438
Now (USD): $14,500.00

Ultrasonic Cleaning Line. Unit has rotation mechanisms on each of the tanks that spin cages that hold parts to be cleaned. Parts Carrier Inside Dimensions: 5-3/8 in. x 5-3/8 in. x 12 in. System can also be used as a standard unit without these carriers. 3 Heated Ultrasonic Baths: 12 L x 18 in. W x 10 in. H. Hot Air Dryer: 12 in. L x 18 in. W x 10 in. H. 480V, 3 Ph, 50/60 Hz, 31A.

Product Details

Used K&S 973

Inventory Number: 54710
Now (USD): $9,500.00

High Pressure Microwash Substrate Cleaning System. For sawed/scribed wafers or photomask cleaning. Utilizes an oscillating high pressure deionized water jet spray of up to 2000 psi with 0.2 micron filtration. Handles wafers up to 8 in. dia. depending on type of chuck installed. Touch screen operation. CO2 reionizer for elimination of static charge. Nitrogen dry. Infrared heat lamp. 115V, 50/60 Hz, 6A.

Product Details